H Beam Assembling Machine

H Beam Assembling Machine

The main components of this assembling machine are welded structure parts with large strength and light weight. It is mainly used for producing light-weight H beam.

Details


 

Model

HZJ1500

HZJ1800

Web height

200~1500mm

200~1800

Web thickness

6~40mm

6~40mm

Flange width

200~800mm

200~1000mm

Flange thickness

6~40mm

6~40mm

Work-piece length

4000~15000mm or as user’s request

Assembly speed

0.5~6m/min

Main machine power

5.5kW

Hydraulic station power

4kW

Above are our standard model, it can be designed and manufactured according to customer’s request.


   1.The automatic centering of flange and web adopts hydraulic motor and gear, with high 

   centering precision and good retentivity. All of the operation are centralized on the electric 

   control button panel, with easy and convenientoperation and precise positioning.


   2.The main transmission part adopts cycloid pinwheel and Taiwan TAIAN brand inverter, the 

   assembly speed can be adjusted between 0.5—6 M/min.


   3.The main components of this assembly machine are welded structure parts with large strength 

   and light weight and the key components have been stress relieved, which don’t deform easily.

 

    1.The material of pressing wheel, guiding wheel and main transmission wheel is 40Cr, with high 

    frequency quenching process on the surface, has the advantages of good abrasion resistance 

    and long service time. The main transmission wheel uses integral forging process with good 

    pressure resistance and high abrasion resistance. 

    2.The automatic centering of flange and web adopts hydraulic motor and gear, with high 

   centering precision and good retentivity. All of the operation are centralized on the electric 

   control button panel, with easy and convenient operation and precise positioning.

    3.The main transmission part adopts cycloid pinwheel and Taiwan TAIAN brand inverter, the 

   assembly speed can be adjusted between 0.5—6 M/min.

    4.It adopts synchronous clamping system to realize flange and web primary centering, which 

   can fundamentally slow down and avoid the phenomenon of H beam tail wagging during 

   assembly.

    5.This machine adopts centralized lubrication system, it can ensure that the wide distributed 

   lubrication points can be lubricated well, and realize the purpose of good lubrication, reducing 

   abrasion and prolong service life of the equipment.

New Products