H beam assembling welding straightening machine

H beam assembling welding straightening machine

Assembling welding and straightening integral machine is a special machine which can make direct assembling, welding, and straightening for the H-beam flange and web plate. It combines the working procedures of assembling machine, gantry welding machine, and straightening machine into one machine, which is equivalent to a h beam welding line. It makes visible higher production efficiency, lower machine cost, and smaller space. Only 2-3 people can operate it. Thus it is a high-efficient machine for H-beam and T-beam production.

Details

   

Web height

200~1500mm

Web thickness

6~16mm

Flange width

200~800mm

Flange thickness

6~20mm

Work-piece length

6000~15000mm or as users request

Assembly and welding speed

0.35~3m/min

Main machine power

3kW

Roller conveyor motor power

0.75*4=6kW

Flux recycling machine motor power

3*2=6kW

Pump station power

4kW

Welding source power

69kW*2=138kW

Above are our standard model, it can be designed and manufactured according to customer’s request.



       Various kinds of welding type, it can use single arc single wire welding or single arc double

       wire welding according to users’ requirement; it also can use submerged arc welding or gas 

       shielded welding.

        The flange and web plate centering device is driven by hydraulic motor. Driven by the 

      worm reducer, gear transmission, screw rod and lead screw, the clamping roller can center

      and clamp the flange and web to realize automatic centering.

        Lincoln welder control box,variable frequency and speed adjusting system. 

        Electric control box and operational panel are positioned separately, which is convenient

       for operation.

1.The flange and web plate centering device is driven by hydraulic motor. Driven by the worm reducer, gear 

transmission, screw rod and lead screw, the clamping roller can center and clamp the flange and web to realize 

automatic centering.

2.Firm welding torch fix mechanism is set up separately, it not only can adjust height and horizontal moving 

position, also can adjust the angle of welding torch on two direction, it guarantees the nice seam form.

3.Main transmission part adopt motor reducer for driving, the assembly and welding speed adjust adopts AC 

variable frequency speedadjusting, the speed adjustable range is 0.35—3 m/min.

4.Assistant straightening machine has special designed structure , the two straightening rollers can straighten 

workpiece automatically under the pushing of oil cylinder, straightening mechanism will not block the line of sight 

on seam, it is convenient to see the adjustment of welding torch and seam quality.

5.Assembling machine and assistant straightening machine can be designed and work separately.

6.This h beam welding line adopts centralized lubrication system, it can ensure that the wide distributed lubrication 

points can be lubricated well, and realize the purpose of good lubrication, reducing abrasion and prolong service 

life of the equipment.

New Products